i just work for one hotel. i add a new ip camera to hikvision nvr, but wrong password, so it show risk on nvr program.when i send ip camera model to hik supporter, not help me.so...
↧
how can i renew my ip camera hikvision model
↧
Unable to configure 2632F after f/w upgrade
Following advice from Use-IP I decided to upgrade three of my cameras from V5.2.X to V5.4.41 using iVMS. First two cameras (2132 & 2332) upgraded perfectly and the third upgrade seemed to go well. However I noticed that whilst the other two cameras retained their IP address and other settings the 2632F lost all settings and came back with a new IP address of 192.168.1.64, presumably via my DHCP server. I tried accessing this IP address from my browser but the connection was refused. I then...
Unable to configure 2632F after f/w upgrade
Unable to configure 2632F after f/w upgrade
↧
↧
Intrusion Detection & Line Crossing event markers during playback on DS-7604NI-K1
I'm recording continuously with my DS-7604NI-K1 (2 cameras) and have intrusion detection & line crossing event notifications set up. It's all working OK apart from the event markers aren't showing during playback. When I initially tested motion detection, the markers showed under the blue line during playback, but now I'm using Intrusion/line crossing they don't show - I've tried selecting them from the LOV with the dotted square & bin symbol.
My cameras are:
DS-2CD2563G0-IS...
Intrusion Detection & Line Crossing event markers during playback on DS-7604NI-K1
My cameras are:
DS-2CD2563G0-IS...
Intrusion Detection & Line Crossing event markers during playback on DS-7604NI-K1
↧
unusual problem watching hik nvr feeds re IE
im using internet explorer to access my hikvision nvr, through 3 pcs, 2 i use at home via wifi, and the third via a laptop remotely via vpn 150 miles away
all laptops are win10 running the same version of windows, i run IE as administrator on all machines, its also the same version of IE.
on the two pcs at home, i get the green boxes (vca?) when viewing the feeds , which is normal behaviour - and exactly what i want
on the laptop that access remotely via VPN, i do not get the green boxes...
unusual problem watching hik nvr feeds re IE
all laptops are win10 running the same version of windows, i run IE as administrator on all machines, its also the same version of IE.
on the two pcs at home, i get the green boxes (vca?) when viewing the feeds , which is normal behaviour - and exactly what i want
on the laptop that access remotely via VPN, i do not get the green boxes...
unusual problem watching hik nvr feeds re IE
↧
Hard drive filling up slower than expected
I've had three 5mp cams in operation for 21 days, one 5mp operating for 14 days, and one 8mp operating for 14 days. Continuous recording has always been set at 10 fps. The cams were all on medium recording resolution until about 2 weeks ago and then were set to "highest." I've got a single 4TB drive in the NVR which, as of this morning, still has 3.5TB of free space. Using the online calculators I was under the impression that this setup would give me about two weeks of recording capacity...
Hard drive filling up slower than expected
Hard drive filling up slower than expected
↧
↧
Sub Stream frame rate and performance with iVMS
Hi,
I setup some cameras and did not really pay attention to the audio/video sub-stream settings. We are using a older PC to run iVMS 4200 lite. I have some newbie questions I am hoping somebody could help on.
Sub Stream frame rate and performance with iVMS
I setup some cameras and did not really pay attention to the audio/video sub-stream settings. We are using a older PC to run iVMS 4200 lite. I have some newbie questions I am hoping somebody could help on.
- My understanding is that over 4 cameras and it will select the sub stream automatically. Is this true?
- The default frame rate for the sub-stream was full frame rate... I suppose that was bad setup on my part as we were seeing dropped frames. I assume this should be...
Sub Stream frame rate and performance with iVMS
↧
Replacing a Faulty Hikvision PoE Connector
Replacing a Faulty Hikvision PoE Connector
Recently we've had a few customers who have experienced some issues with the PoE connectors on the pigtail of their Hikvision device that has caused it to stop receiving power. This can be as a result of a lot of things - faulty weatherproofing leading to corrosion within the connector, damaging it or just plain bad luck.
Hikvision themselves unfortunately do not offer replacement PoE connectors so...
Replacing a Faulty Hikvision PoE Connector
↧
No longer connecting to HikVision/iVMS after router change
Hi all
I've got a 3 camera set up with a DS7604NI-K1 NVR. I've changed my router from an Asus to a Ubiquiti and connected everything back up.
No longer able to connect to my camera system on iVMS or the web module.
iVMS is showing the device as active when I search for it but says it already exists when I try to add it. However in the camera window, the cameras have red "stop" signs next to them and won't display the feed.
Any suggestions as to how I need to change my configuration to...
No longer connecting to HikVision/iVMS after router change
I've got a 3 camera set up with a DS7604NI-K1 NVR. I've changed my router from an Asus to a Ubiquiti and connected everything back up.
No longer able to connect to my camera system on iVMS or the web module.
iVMS is showing the device as active when I search for it but says it already exists when I try to add it. However in the camera window, the cameras have red "stop" signs next to them and won't display the feed.
Any suggestions as to how I need to change my configuration to...
No longer connecting to HikVision/iVMS after router change
↧
Is port 8000 required for email notifications?
I've had my 7608 setup and running fine for about two weeks. Email notifications were working just fine, and I opened the correct ports on my router. Due to several illegal login attempts, I closed all ports except the server port on 8000. Email worked fine. Then with more illegal login attempts, I changed the server port under network settings to port 8885, and made the corresponding change in port forwarding in my router. I no longer get any email notifications, and the test button in the...
Is port 8000 required for email notifications?
Is port 8000 required for email notifications?
↧
↧
HikVision NVR "Invalid encryption key" error message
Updated 26th November to clarify setting and use of encryption key / verification code.
Seen as a pop-up at the bottom right screen corner in your browser when trying to access a video stream from a HikVision camera to Live View it/them on your HikVision NVR.
![HikVision invalid encryption key 6-3-18.png]()
There is another version of the message - "The stream is encrypted. Please go to the Local Configuration interface to set the Encryption Key and restart live view".
The 'key' that you need to...
HikVision NVR "Invalid encryption key" error message
Seen as a pop-up at the bottom right screen corner in your browser when trying to access a video stream from a HikVision camera to Live View it/them on your HikVision NVR.
There is another version of the message - "The stream is encrypted. Please go to the Local Configuration interface to set the Encryption Key and restart live view".
The 'key' that you need to...
HikVision NVR "Invalid encryption key" error message
↧
Small metal Washer found whilst disassembling a 2385
As I was installing an SD card into my turret 2385 I have found this washer type thing, where about does it go?
![IMG_5862.jpg]()
Thanks!
Thanks!
↧
Unable to playback recordings from Nvr
Hi,
Am a newbie here, having some trouble with playback from my nvr, I've listed the details below. My problem is I can playback the videos off both my cameras up until sunrise then I just keep getting an message saying 'connection unstable'
DS-7608NI-K2-8P
2 cameras DS-2CD2T55FWD-I5
Everything else seems to be up and running fine, I can access the nvr from 4g etc via the router and IP address, and both cameras on home network or off it.
Any help would be greatly appreciated.
Jason
Am a newbie here, having some trouble with playback from my nvr, I've listed the details below. My problem is I can playback the videos off both my cameras up until sunrise then I just keep getting an message saying 'connection unstable'
DS-7608NI-K2-8P
2 cameras DS-2CD2T55FWD-I5
Everything else seems to be up and running fine, I can access the nvr from 4g etc via the router and IP address, and both cameras on home network or off it.
Any help would be greatly appreciated.
Jason
↧
New router
iVMS 4200
Had a new router last week, camera working fine on the tv and laptops but can't seem to get it working on my mobile, I've added new router network name in WiFi settings and put in the password, and it generates a qr code?
App says I'm not logged in but will let me open the app and then asks if I want to confirm logout?? tried to reset password, verification sending code error comes up. tried registering phone again nothing!!
Also I've no idea where to generate a qr code on...
New router
Had a new router last week, camera working fine on the tv and laptops but can't seem to get it working on my mobile, I've added new router network name in WiFi settings and put in the password, and it generates a qr code?
App says I'm not logged in but will let me open the app and then asks if I want to confirm logout?? tried to reset password, verification sending code error comes up. tried registering phone again nothing!!
Also I've no idea where to generate a qr code on...
New router
↧
↧
NVR Adding extra Admin accounts
HI
I have a few NVR's DS7716NI, D9632NI. I can create new users but not as Admin. Is there a way to do this?
I have the option when I create a user to set as an operator or User
I have a few NVR's DS7716NI, D9632NI. I can create new users but not as Admin. Is there a way to do this?
I have the option when I create a user to set as an operator or User
↧
NVR CCTV
Hi all,
After realising that setting up a NVR system would be so much easier for me vs DVR. i have chosen to go down this route. I require potentially 3 bullet cams (or 4 ) and maybe a dome (but i am not too sure how i can install this on the Porch?
So few questions for you...
1) Which NVR would you recommend?
2) What kind of specs should i be looking at when looking at IPTV Cameras
3) If i do the following set up
IP cam Ethernet to ---- PoE Hub -------- Ethernet cable to NVR
Does the...
NVR CCTV
After realising that setting up a NVR system would be so much easier for me vs DVR. i have chosen to go down this route. I require potentially 3 bullet cams (or 4 ) and maybe a dome (but i am not too sure how i can install this on the Porch?
So few questions for you...
1) Which NVR would you recommend?
2) What kind of specs should i be looking at when looking at IPTV Cameras
3) If i do the following set up
IP cam Ethernet to ---- PoE Hub -------- Ethernet cable to NVR
Does the...
NVR CCTV
↧
Unable to do 50fps on the DS-2CD4025
Hello to all at the Forum,
I have 2 network cameras DS-2CD4025FWD-(A)(P) connected to a NVR model DS-7604NI-E1/4P/A.
I use the system for animal observation and I have been using 25fps, but I would like to record at 50fps (which the specs say it do).
However, I cannot set the record parameters on the NVR to 50fps: I have tried all combinations of Bitrate type/Video quality/Bitrate mode but I got always a "setting failed" message.
I was able to set the Event mainstream to 50fps (but not the...
Unable to do 50fps on the DS-2CD4025
I have 2 network cameras DS-2CD4025FWD-(A)(P) connected to a NVR model DS-7604NI-E1/4P/A.
I use the system for animal observation and I have been using 25fps, but I would like to record at 50fps (which the specs say it do).
However, I cannot set the record parameters on the NVR to 50fps: I have tried all combinations of Bitrate type/Video quality/Bitrate mode but I got always a "setting failed" message.
I was able to set the Event mainstream to 50fps (but not the...
Unable to do 50fps on the DS-2CD4025
↧
Hikvision "Device is Offline"
Morning all!
I am using Hikvision DVR with 8 Dome cameras, i can view all the cameras on the desktop client of IVMS but on my phone it states "Device is Offline" any ideas how i can fix?
The IP addresses match on both bits of software.
I have tried on both Android and IOS.
My DVR model is DS-7208HWHI-K1
I am using Hikvision DVR with 8 Dome cameras, i can view all the cameras on the desktop client of IVMS but on my phone it states "Device is Offline" any ideas how i can fix?
The IP addresses match on both bits of software.
I have tried on both Android and IOS.
My DVR model is DS-7208HWHI-K1
↧
↧
The latest version of Hikvision's iVMS-4200 software for Windows V2.8.2.2 - 21st March 2019
The latest version of Hikvision's iVMS-4200 software for Windows (version V2.8.2.2) can be downloaded here:
Hikvision's European portal - DOWNLOAD EU PORTAL
Hikvision's UK portal - HIKVISION UK PORTAL
(NB - it is...
The latest version of Hikvision's iVMS-4200 software for Windows V2.8.2.2 - 21st March 2019
Hikvision's European portal - DOWNLOAD EU PORTAL
Hikvision's UK portal - HIKVISION UK PORTAL
(NB - it is...
The latest version of Hikvision's iVMS-4200 software for Windows V2.8.2.2 - 21st March 2019
↧
Hikvision camera down after New Router installed
Hello,
I'm hoping someone can help. I had 3 Hikvision cameras and an NVR installed in October last year. Everything has been working great until we upgraded the routers yesterday to a Whole Home Mesh Wifi System yesterday. I have managed to get the NVR online and can see the 2 camera connected directly to it but not the front door camera.
The original setup was; 2 cameras front and back of house into the NVR in the loft. The NVR was then connected to a Wifi Powerline hotspot. The last...
Hikvision camera down after New Router installed
I'm hoping someone can help. I had 3 Hikvision cameras and an NVR installed in October last year. Everything has been working great until we upgraded the routers yesterday to a Whole Home Mesh Wifi System yesterday. I have managed to get the NVR online and can see the 2 camera connected directly to it but not the front door camera.
The original setup was; 2 cameras front and back of house into the NVR in the loft. The NVR was then connected to a Wifi Powerline hotspot. The last...
Hikvision camera down after New Router installed
↧
Hikvision DS7216HWI-SH DVR Boot issues
I have been trying to sort out boot issues on the above DVR, which I got hold of to try and fix. I've never had it working although it has worked well in the past.
It boots to the Hikvision "Embedded Net DVR" splash screen then the monitor states that it "cannot display this video mode". Then it seems to recycle and reboot to the splash screen.
I cannot see any video so cannot access the device config settings, although the front Tx/Rx light and my ethernet hub traffic light are flashing...
Hikvision DS7216HWI-SH DVR Boot issues
It boots to the Hikvision "Embedded Net DVR" splash screen then the monitor states that it "cannot display this video mode". Then it seems to recycle and reboot to the splash screen.
I cannot see any video so cannot access the device config settings, although the front Tx/Rx light and my ethernet hub traffic light are flashing...
Hikvision DS7216HWI-SH DVR Boot issues
↧