Quantcast
Channel: Hikvision
Viewing all 3378 articles
Browse latest View live

Connecting from outside

$
0
0
Hi everyone hope some one can be of assistance, I have a Hikvision DS-2CD2342WD-I camera and have set it up over my LAN. My problems start when i try to set it up to use remotely, Have tried a Hikvision dnns but it keeps coming up with device not found. I then tried to set up with my dyndns service. I have forwarded port 80 renamed to 801, but again comes up with not able to connect to server. I am truly lost now hope someone can give a step by step installation guide to allow viewing of...

Connecting from outside

Using Netgears ready share

$
0
0
I am tying to using the usb readyshare part of my router. It seems to have entered correctly but upon carrying out a test i get this message "Mounting to NAS server failed. Invalid directory or incorrect user name/password." any assistance would be appreciated

Hikvision Firmware Update for DS-2CD2x42FWD IP Cameras

Enable / Disable Motion Detection with iVMS 4500

$
0
0
Enable / Disable Motion Detection with iVMS 4500

In case this slipped you by, Hikvision recently introduced a frequently requested feature with their iVMS 4500 4.4.0 update, which is the ability to configure a connected device remotely and enable / disable motion detection via a mobile device.

Configuration options are currently limited - for full configuration, you will still need to access the device via a web browser, iVMS 4200 etc.

Many of our...

Enable / Disable Motion Detection with iVMS 4500

Hikvision Privacy Masks

$
0
0
Hikvision Privacy Masks
We've had a few queries lately regarding what a privacy mask is and when you'd want to use one, so I thought I'd create a quick thread explaining what they are and how to set them up.

Essentially, configuring a privacy mask allows you to "block" or remove certain areas of a scene from the camera's view. It will not be visible in either the Live View of the camera or the recorded footage - in its place will be a...


Hikvision Privacy Masks

How to set up Hikvision DDNS

Hikvision DS-2CD2542 - Remote View Via Live Cams Pro iPhone App

$
0
0
Hi all,
I am a long time Foscam user but have bought a Hikvision for my front door due to its compact size. Have got it working a treat for internal and external access with the Hikvision iPhone app, and internally via Live Cams Pro.
LCP is my preferred app and I use it for all my Foscam camera however I cant get it to work externally with my Hikvision. When I say i cant get it to work I mean i don't know which path to enter. The remote Hikvision DDNS path is...

Hikvision DS-2CD2542 - Remote View Via Live Cams Pro iPhone App

Hikvision Firmware Update for DS-2CD2xx2 IP Cameras


H.264+ turns itself off?

$
0
0
Hi there,
Recently purchased a 4mp dome for my Hikvision NVR:
Camera model is DS-2CD2742FWD-IZS
Camera firmware is V5.3.8 build 151224
NVR model is DS-7608NI-E2 / 8P
NVR firmware is V3.4.62 build 160503
Really want to take advantage of the H.264+ encoding and compression to save some bandwidth on the NVR and the associated storage savings, been quite impressed with the impact that H.264+ has.
Settings all work fine in the NVR and when I connect to the caneras internal webpage H.264+ its...

H.264+ turns itself off?

5mp DS-2CD2352-I - available in the UK?

$
0
0
Is the DS-2CD2352-I 5mp wdr exir camera available in the UK?

How to fix a Hikvision camera factory resetting whenever it reboots

$
0
0
How to fix a Hikvision camera factory resetting whenever it reboots
In the last couple of years, we've seen a long-standing issue with a very small number of Hikvision cameras which causes them to completely factory reset and lose any configurations you might have set whenever they're rebooted. This can be a physical power cycle by removing their power source briefly, or it can be a reset triggered by accessing the camera via a web browser,...

How to fix a Hikvision camera factory resetting whenever it reboots

7600 vs 7700 nvr

$
0
0
Can anyone outline some of the difference between these? I can see the slight hardware differences bit other than that have no idea. Is the 7700 significantly better that the 7600 somehow?

OSD Settings - Save Failure - Invalid Parameter

$
0
0
I am trying to turn off the overlay under Images > OSD Settings

http://i.imgur.com/6vldJXu.png

However each save renders - Invalid Parameter

How can I fix this? I am using the latest firmware. The overlay is annoy because BI picks it up as movement.

hikvision keyboard ptz control

$
0
0
Hello,
I use a dvr DS-7332HGHI-SH,a ptz camera DS-7230TI-A 2mp and a DS-1000KI keyboard.I read the instructions about keyboard to control the ptz camera from dvr,without the RS-485.As you will see in photos i used the KB ports D+,D-. As i read in keyboard's manual i should connect :
From keyboard,"DVR CON" the Ta port with dvrs D+ port in KB,and Tb with D- port in KB.

At next i try to control ptz camera.The ptz camera has address 0 default,com format 2400 and protocol automatch.The cameras...

hikvision keyboard ptz control

Upgrade NVR firmware

$
0
0
I have 7616ni-se/p NVR. I bought NVR with 8 cameras only. Everything is working fine.
Last a few days, I bought 3 more ip cameras, but cannot add those ip cameras to NVR.
Hikvision NVR firmware is 3.0.9.
Hikvision New ip camera firmware is 5.4.1.
I would like to upgrade NVR firmware , or can downgrade ip camera firmware? Plz advice me. Thanks in advance.
Nay Myo Thar Aung

Camera issue

$
0
0
Evening all,
New to the site and new to CCTV systems in general.
I recently installed a Hikvision NVR and 4 dome cameras, 3 of which seem to work brilliantly. One of the cameras however seems to be playing up...please see attache short video of the issue



The images, both live and recorded, seem to flash light/dark. During the daytime especially, it does this every few minutes, at night time it seems to do it when it detects movement. The camera in question is...

Camera issue

[Tutorial] How to Reset the Password of a Hikvision Camera or NVR.

Unable to access Webpage..

$
0
0
We've got a DS-7616NI which has been working fine. I've just tried to access the webpage from different locations and get "the web page can not be displayed". I'm still able to access the device from my phone using the iVMS-4500 client and see the cameras and images, it's just the webpage that will not display. I've had this before and the only solution was to reboot the NVR.
I'm able to ping the NVR and it's can access from outside of our network - really strange.
It's running v3.4.2...

Unable to access Webpage..

Testing microphones with Hikvision cameras

How to set up Hikvision's EZVIZ service

Viewing all 3378 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>