Quantcast
Channel: Hikvision
Viewing all 3378 articles
Browse latest View live

Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped

$
0
0
Ok at a bit of a loss here, this has been working perfect for a while, now it isn't.

Basic checks

1) Email account? Sent test email to all 3 users in group. Works ok.
2) Check intrusion detection

Area Settings
Area 1 is Yellow



Settings
1
58
5

Arming Schedule all Blue

Linkage method
Send Email
Trigger Channel D1


I have also checked in Event logs nothing showing here when i jump around like a loonie in the zone of camera D1, any ideas here? Im loathed to...

Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped

Hikvision hard drive woes

$
0
0
Been having some issues with my Hikvision DS-7604NI-K1/4P NVR

First, my hard drive stopped working (displaying not exist), its been rock solid for around a year, so I tested it in my pc and all seemed well.
In the end, I bought a new replacement HDD just to eliminate that, still didnt work with the new unit in.
it sounds like it's not spinning up properly, so I tested the power supply into the HDD, steady 5v and 0.7a - which according to my limited experience should be ok.
I have now got...

Hikvision hard drive woes

IVMS 4200 permanently minimized

$
0
0
Hello.
Following a routine Windows 10 update, my IVMS 4200 CCTV images are all permanently minimized. That is, there is a single icon on the bottom bar on the screen. The maximize and restore options are all greyed. Any suggestions gratefully received.

Hikvision 2121G0 camera not recording to microSD memory card

$
0
0
Hi, I have a Hikvision Network camera that is able to save recordings into the SD card but I am unable to view the recordings in the playback tab when using a web browser. I have to manually take out the SD card from the CCTV and read it on my laptop to confirm that the recordings are being saved. I am unable to locate any of the recorded videos. Is there any way to solve this issue? Note, I do not use a NVR.


1578382720237.png

[ATTACH type="full"...

Hikvision 2121G0 camera not recording to microSD memory card

Smart Track AND Patrol

$
0
0
Just curious if it’s possible to enable smart tracking and patrols at the same time? I have both enabled, and the smart tracking doesn’t seem to work anymore after enabling patrols. Maybe just something I’m missing so I figured you guys would know best. TIA

Number of images with alerts

$
0
0
What are the standard number of images emailed with alerts. My line detection and intrusion have different numbers of image attached to email alert (1or 3). Some cameras seem to have different number of images attached to similar events.

I did read a post here before about it but can’t find it with the search function! Think there was a change when firmware changed

Hikvision DS-7224HQHI-K2 DVR - Cameras not showing?

DS-7608NI-K2/8P - adding IP camera using POE switch - need firmware update and how?

$
0
0
I connect 5 IP camera (each IP cam with manual defined ip adress, user, password etc) to a hickvision POE switch on a building
Now the NVR DS-7608NI-K2/8P is set on a different building where the internet router is.
My wish is to add those 5 IP cameras to the NVR:
1. when i setup and connect the switch to LAN router where NVR is also connected (changing IP to be in same class etc) - i can acces each camera, the NVR see all 5 cameras on the add list but can't add, it say "IP limit reached"...

DS-7608NI-K2/8P - adding IP camera using POE switch - need firmware update and how?

Not getting notifications from new camera

$
0
0
I am having trouble getting notifications from my new ColorVu camera, I already get emails from my older turret for line crossing and from the doorbell when it is activated.
My system is all Hikvision, the NVR is a DS-7604NI-K1/4P(B) with two cameras connected by WiFi, the DS-KB6403-WIP doorbell and DS-2CD2435FWD-IW Cube for keeping an eye on the dog. The two turrets in the back garden are hard wired back to the NVR, the older DS-2CD2385FWD-I mounted on the fence faces the gate and is set to...

Not getting notifications from new camera

HikVision NVR Crashing

$
0
0
I have a new HikVision 6 Cam system that works well for about 8 hours, then the NVR crashes loosing all video streams.
A hard reboot (unplug/replug) usually brings everything back on line. The Kit is Model EK1-Q82T46 and the NVR is ERI-Q108-P8, purchased in September in USA. The NVR Firmware is V3.4.96Build180324 and when I try an on-screen update, it tells me that there is no Firmware update available.
The system looses video to a direct attached TV, to the iVMS-4200 software and...

HikVision NVR Crashing

My Hikvision cameras keep reverting to a low bitrate

$
0
0
One of my cameras keeps reverting to 32 Kbps bitrate, which obviously results in a blocky image.

I know that there are 3 ways to configure cameras; on the NVR (and it's webpage), on the camera's webpage and on IVMS. The cameras were initially set up through the NVR, and then the settings have been tweaked through IVMS. For some reason though, even though none of the above have the bitrate set to 32 Kbps, it keeps reverting back.

Is there a way to see why the change is happening? I can't...

My Hikvision cameras keep reverting to a low bitrate

Setting up ANPR Camera

$
0
0
Hey folks,

I've got a DeepinView camera, and wanted to know if this - How to set up Hikvision ANPR, is the most up to date setup instructions or if there is anything else?

I notice it says setup through NVR, are there any for setting up through a 4G router only?

Thanks

How to make Hikvision keypad silent?

$
0
0
I have Hikvision DS-KD8003-IME1 with keypad DS-KD-KP. I have configured the system using iVMS-4200 but there is one thing which I haven't been able to solve. The keypad tone is somewhat annoying and I would like to disable it i.e. I would like to make the keypad silent. Any ideas how to do this?

Thumbnail Images on Playback Timeline NO RESOURCE

$
0
0
Hello

I have a DS7608/K2 8P running latest version 3 firmware connected to 4 x 2343GOs and 1 x 2365G1 camera running latest firmware also. Resolutions and frame rates set to max on all with bit rates enabled for highest settings. All works great, playback, live view, etc. except in playback on all cameras there are no thumbnail images showing on the timeline. Instead the thumbnails show "no resource".

I have tried to work out if its my settings but have not come across anything...

Thumbnail Images on Playback Timeline NO RESOURCE

Wrong user name or password!

$
0
0
Hi,
I hope someone give me a clue on how to rectify the above? Just recently every time I try and log into my 6003 Wifi door bell I get the above message. I know the password is correct as I can log in via the SADP tool but I cant using the bell's IP address! I am using "admin" as user name.

Replaced broken camera now can't get good picture

$
0
0
Hi,

I have a Hikvision installed at home.
It's a DS-7204HGHI-F1 with three DS-2CE16C2T-VFIR3 cameras.
One of the cameras went bad and so the installer replaced it with a new one.
The new camera is a DS-2CE16D0T-VFIR3F.
Now I have 2 cameras with great image and the new one is a really bad image (the new camera).
I've called them several times and the final result is always the same. I personally think they don't know what they are doing. Also, they don't give me the admin password (they say...

Replaced broken camera now can't get good picture

I Series NVR Update

$
0
0
Hello all

Just seen on the Hikvision portal that there is a new firmware update for the I series NVR that's been released today.

V4.22.005 Build 191208

Hikvision iVMS-4200 - can I hide the event markers?

$
0
0
Hide smart event area markers (in blue) is there any way so you don't see them??
Thanks

Hikvision Hik-Connect IOS App user manual V3.10.0

$
0
0
Please find the latest Hik-Connect user manual attached for IOS, iPhone, iPad users

Hik-Connect: Playback speed

$
0
0
Hi everyone,

In the last month, I took the plunge and bought a HikVision NVR (DS-7604NI-K1/4P) for home with four G1 Series IP camera's (2x 2355, a 2155 and a 2363). Cabled it all myself and I'm really happy with the results, worth every penny.

Thanks to this forum (megathread mainly), I have managed to get the VCA settings working (line crossing and intrusion detection) working with email alerts and also the IP camera firmware updated to the latest version.

I have also enabled the...

Hik-Connect: Playback speed
Viewing all 3378 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>