Quantcast
Channel: Hikvision
Viewing all 3378 articles
Browse latest View live
↧

5.5.80 Issues

December 9, 2018, 1:13 pm
$
0
0
Just updated my DS-2CD2385FWD-I s to 5.5.80 from 5.5.61 and experienced problems:
1. NVR (7732NI-I4) showing "No Resource" message on some cameras at both Main Stream and Sub-Stream. Seemed to move from camera to camera but mainly my newer higher-quality (data rate) cameras. Saw on Live View (from connected HDMI screen) and Playback.
2. Looking at the Video Parameters of the cameras, those I'd updated said Sub-Stream was not supported.
3. Looked at data rate when screen showing 3x3 cameras...

5.5.80 Issues
↧
Search

High resolution on main, error on sub-stream

December 11, 2018, 1:58 pm
$
0
0
I have a DS-2CD2155FWD-I.
When I choose anything higher than 1280*720P I get picture error on the sub-stream, see my picture. Since I bought a 5 MP camera I want to use the highest resolution 3072*2048 but I also need the sub-stream for my alarm detection/verification system. If I choose 1920*1080P there is a smaller error, and then higher than that it is the same fault on all levels. I have tested to change Video quality with no luck. I just updated with latest firmware 5.5.80 but no...

High resolution on main, error on sub-stream
↧
↧

Image OSD settings - can't move the date and time to up right corner

December 12, 2018, 5:52 am
$
0
0
I have a Night Fighter and very happy with it, but there is several small problems I can't solve on my own. One is the placement of date and time in pictures and video.

When config the OSD settings, display camera name, date and time etc. one can move the rectangel inside the config-view, but spite I moved it as far I could to the upper right corner and saved, It is displayed on pics and video on top middel of the view.

As you can see on the attached pic I have tried (in red) to place the...

Image OSD settings - can't move the date and time to up right corner
↧

The latest version of Hikvision's iVMS-4200 software V2.8.1.4 - 3rd December 2018

December 13, 2018, 12:36 am
↧

DS-2CD6D24FWD-IZHS how do i add all 4 lenses to my NVR

December 13, 2018, 2:10 am
$
0
0
Hi Guys

I have inherited a DS-2CD6D24FWD-IZHS i can add to my NVR but it only shows one lens I assume this is due to the fact that each one needs to be its own channel but can't figure out how to do this the NVR is DS-9632NI-I16

I also cant seem to find the firmware for it

any advice, please
↧
↧

Security problem with mail from camera

December 13, 2018, 6:40 am
$
0
0
I have config my night fighter 4A26 to send pics back to me when something happen. The mail incl. 3 pics and the text:

EVENT TYPE: Intrusion Detection
EVENT TIME: 2018.12.12,15:24:55
IPC NAME: Cam 1
CHANNEL NAME: 1
IPC S/N DS-2CD4A26FWDXXXXXXXXXXXXXXXXXXXXXXXXXXXX (the complete serial number).

I have of course used Network, Advanced settings, Email:
SMTP port: 465
Email Encryption: TLS

I also tried SMTP port: 25 and enabled STARTTLS with no change.

But when the mail arrive it is as...

Security problem with mail from camera
↧

Hikvision CSV File

December 13, 2018, 7:06 am
$
0
0
Hi All,

Hopefully someone is able to aid me with a probklem I've come up against!

I have a number of Hikvision DS-2CD4A26FWD-IZS/P cameras that I currently use to pick up number plates for my car park, however we can only currently record images of the vehicles with the vehicle information below.

Is there a way to have a CSV file of this information, rather than the images at all? Obviously the plate, time and date is all I really need, if possible.

Thanks in advance.

Neil
↧

New I-series firmware 4.1.70

December 13, 2018, 10:39 am
$
0
0
v4.1.70 is out. Don't know what's new, no changelog as per usual:
DOWNLOAD EU PORTAL

EDIT: It appears to have updated the web plugin to V3.0.6.46 with matched that on the latest G1 camera firmware, so you no longer get the annoying "new plugin detected" message as you switch between the camera and the NVR web UI.
↧
Search

Latest HikVision Firmware for -I NVRs - new V4.1.70 (76XX, 77XX, 96XX NI-I) - 14th December 2018

December 14, 2018, 1:51 am
↧
↧

R0 latest firmware 5.4.41 or 5.4.5?

December 14, 2018, 3:29 am
$
0
0
I have a R0 (DS-2CD2332-I) with CCWR which is the latest and greatest firmware? The 5.4.41 seems older but the numbering of it and date appears later.
↧

Viewing remotely over 4G

December 14, 2018, 9:18 am
$
0
0
Hi,

Please could somebody assist?

I can’t get access remotely via iVMS anymore. Please see attached screenshots of the current configuration and how I’ve attempted port forwarding on my Virgin router.

Any assistance would be great thank you in advance.

Thanks again
Graham
↧

HikConnect App tells me that the device is offline

December 15, 2018, 5:39 am
$
0
0
Hey guys,

I've been having an unexplained problem for a few days now. My device is displayed as offline in the HikConnect app.

The router is online, the web interface is accessible via the IP of the device and in the configurations the connection to HikConnect is shown as online.

If I want to connect the device to the app it says that the device is connected to the router but cannot connect to the internet. But the device can be reached via the external IP...

Best regards
↧

Latest HikVision Firmware for EasyIP 3.0 Cameras - new V5.5.8 (G1 Series cameras)

December 15, 2018, 6:57 am
$
0
0
Hikvision have released a new V5.5.8 firmware version today for their popular G1 Series / EasyIP 3.0 cameras.

This latest firmware version can be downloaded from their European portal here:
DOWNLOAD PORTAL

Hikvision have also provided Release Notes for this new firmware version (attached).
↧
↧

Hikvision DS-KB6403-WIP Doorbell- connecting to a standard door chime.

December 15, 2018, 1:38 pm
$
0
0
Hi guys, I’m new to the forum and am hoping you will be able to help me out with something.I set up my Hikvision DS-KB6403-WIP 12vdc doorbell and it works like a dream as for ringing my phone, and being used as an additional camera on my NVR.
The problem I have is I’m having trouble getting coherent information on connecting it in to an existing traditional doorbell -it vaguely mentioned in the blurb that it is compatible with standard doorbells, And there is a wiring diagram on the...

Hikvision DS-KB6403-WIP Doorbell- connecting to a standard door chime.
↧

Unable to save settings on HIKVISION DS 7208 HGHI-SH DVR

December 8, 2018, 2:08 am
$
0
0
So I'm having this issue from a month back and don't really know what triggered it. I have an HIKVISION DS 7208 HGHI-SH DVR hooked on to 6 Analog cam's with 1 TB of HDD for storage. Everything is working fine except that if I make any changes now like an OSD camera name change or Number of camera view change, it changes on clicking the save button but on DVR re-boot it all revert back to the previous setting.

I tried initializing the HDD again and also changed the tiny battery inside the...

Unable to save settings on HIKVISION DS 7208 HGHI-SH DVR
↧
Search

NVR104 A/P not picking up cameras when plugged into any of the POE ports on NVR

December 16, 2018, 1:08 pm
$
0
0
Hi all,

I'm new here. I recently bought the HikVision 4-port POE NVR, along with an IPC-B120 and an IPC-D120. I have set both cameras up and have been able to see the live view from the Hik-Connect app when they are plugged directly into my router or switch (using the separate power supply), but whenever I plug them into the NVR, I notice the camera switches on (as I can see the IR light up), but the NVR just does not seem to find the camera :(

Attached are the photos of my NVR network...

NVR104 A/P not picking up cameras when plugged into any of the POE ports on NVR
↧

Hik-Connect: unable to view remotely (network unstable error)

December 16, 2018, 11:58 pm
$
0
0
Hi,

I’ve just installed a HikVision DS7608-NI-I2 together with 4 HikVision cameras.

I’ve been able to get the HikConnect app running, and the NVR accessible.

However, I keep getting the “Network unstable” error, and can’t view the streams. The upload speed on the broandband is 4-8MB which I thought should be enough ?

Is there anything else I can try ? (eg. Can I reduce the resolution for the stream to see if that helps ?).

Any guidance appreciated!
↧
↧

Hikvision install mess - NVR and IP cameras

December 17, 2018, 4:59 pm
$
0
0
I have installed a NVR (DS7608NI-I2/8P) with a HIK ptz camera. Before I installed the camera I setup the NVR so I could use HIK-CONNECT. That was working just fine to connect remotely. I connected my camera and now my hik-connect says offline. The camera is not showing any video but I'm using a MAC so do not have plugin. I can playback the video and I see that but have no way to adjust my camera now. Also when I use IVMS4200 it does not want to add the camera even though it shows it...

Hikvision install mess - NVR and IP cameras
↧

HikConnect remote configuration

December 18, 2018, 5:44 am
$
0
0
Hi,

I’m trying to remote configure a Hik NVR. In the HikConnect app, when I select “automatic” for the DDNS configuration, I just get a “Connection Timeout” error.

Any thoughts ? I thought that port opening was not required with HikConnect ?

Any guidance appreciated. Have done a search but can’t find any previous results that help.

Thanks!
↧

DS-2DF8236IX-AELW Camera no video stream

December 18, 2018, 6:39 pm
$
0
0
Hi folks, I recently bought a DS-2DF8236IX-AELW camera and connected to a DS-7608NI-K2/8P NVR in a PoE port. The camera is powered by its own 24VAC power supply (comes with it), since it´s Hi-PoE and PoE ports on NVR are normal. PoE port on NVR shows activity (leds are blinking) but the problem is that I can´t see the video stream on NVR screen. I have connected another 2 PoE cams to the NVR (DS-2CD2123G0-I and DS-2CD2023G0-I) and works perfectly. Can anybody help me please?? Thanks in...

DS-2DF8236IX-AELW Camera no video stream
↧
Viewing all 3378 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>