September 5, 2019, 8:46 am
Is it possible to get a Non HikVision camera to display on iVMS-4500 viewer? just a local LAN connection needed....
I've got 5 Hikvision cameras that display fine in iVMS-4500, but would like to add one Non-HikVision camera (An older TrendNet Camera)
Does a tutorial on this exist?
Thanks Jan
↧
September 5, 2019, 3:15 pm
Hello! I've been tasked with making the cameras at a business quicker, to do this I've obtained a GSM router. When connecting to the camera through the business internet the camera works fine with a dyndns address, however, when I access from the GSM router it will allow me to log in and imediately after log me out.
The camera is not local and the appropriate ports have been forwarded.
I read somewhere that it might be a DNS issue, which was correct, since whenever I did a nslookup for the...
HikVision Camera Logging me out when accessed from a different IP
↧
↧
September 6, 2019, 2:53 am
I have the above door bell connected to my home WIFI mesh network setup, its a BT HH6 meshed to 3 Devolo Powerline 1200AC WIFI nodes (both 2.4 &5 Ghz channels are set to auto). The signal is very strong all around the house including at the door bell. I had the door bell working faultlessly for months and then it suddenly went off line and only a reset could get back online. The bell has not worked properly for the last few months, after a reset is could work for days or hours before going...
DS-KB6003-WIP door bell keeps going off line
↧
September 6, 2019, 5:50 am
↧
September 6, 2019, 7:26 am
Hoping someone can help. I am in no way tech minded but can do basics. My Hikvision CCTV box has been replaced as it was faulty. I can view on my tv and mobile phone no problem but can longer view on my laptop. I have installed the app on my laptop and it detects the CCTV. When I try to add the camera it tells me the registered user does not have permission. I have tried asking my installer but he's not much use, as he's lost his tech guy. Any ideas would be great. Thanks in...
Laptop to view Hikvision
↧
↧
September 6, 2019, 9:32 am
Hi All
I've just received my Hikvision DS-7604NI-K1-4P NVR, not setup yet, but seen Hikvision "highly recommend" using a UPS. It's not something i'd heard of before, so started searching online, however there appears to be quite a variety, some of which are quite expensive. I've read that you really want a line-interactive one, but it's difficult to know what size/va I need?
I am going to be running my cameras via poe from the nvr, 24/7, i only have 1 camera, but will probably add another...
UPS
↧
September 6, 2019, 3:07 pm
↧
September 7, 2019, 4:04 am
My Hikvision records to the NVR for about three or four days, and then the NVR stops recording and asks for authentication. I then re-enter the camera's password, the NVR recognises it, and it starts recording. Does anyone know if this is a problem with the camera or the NVR? Any help would be very much appreciated.
↧
September 8, 2019, 4:58 am
Hi all,
After realising that setting up a NVR system would be so much easier for me vs DVR. i have chosen to go down this route. I require potentially 3 bullet cams (or 4 ) and maybe a dome (but i am not too sure how i can install this on the Porch?
So few questions for you...
1) Which NVR would you recommend?
2) What kind of specs should i be looking at when looking at IPTV Cameras
3) If i do the following set up
IP cam Ethernet to ---- PoE Hub -------- Ethernet cable to NVR
Does the...
NVR CCTV
↧
↧
September 8, 2019, 7:13 am
Hi All
Just setting up my new Hikvision nvr DS-7604NI-K1-4P and i've started by adding my 2 existing cheaper non Hikvision cameras, which are added and are showing in the home screen. As the title suggests, I am getting an error/warning for both of those cameras "resolution or bitrate of substream not supported"?
I've looked at those settings and the resolution options on the camera vs what's listed in nvr don't match, however there isn't options that do, i've also unticked the substreams...
Resolution or bitrate of substream not supported
↧
September 9, 2019, 1:45 am
The Russian hackers are trying to connect to one of my surveillance cameras model DS-2CD2041G1-IDW1 I think they have access to the hik-connect domain server and the hik-connect client data We closed all ports in the router including port 80
what to do?
↧
September 9, 2019, 6:37 am
Just want to know will a WD 10TB hard drive be ok inside a DS-7616NI-I2 / 16P want more space
right now got a 2x4TB WD Hard Drive need more space looking at getting 2x 10TB Hard Drives then Using the old 2x4tb just for more space on my NAS Drives
↧
September 9, 2019, 6:47 am
Hi guys
I've enabled face detection on a couple of my cameras, but I (maybe mistakenly) thought the NVR would capture and store stills of the faces etc. I can't seem to find where that is, if it does. Otherwise, how can I use face detection, please? Any input gratefully received!
Config for example is DS-7608NI-I2 with a DS-2CD2385G1-I camera.
NVR and camera both on latest firmware I believe.
DS-2CD2385G1-I is on V5.6.2 build 190701 whilst the DS-7608NI-I2 is on V4.21.008 build 190625...
Face detection
↧
↧
September 10, 2019, 1:51 am
Hi
When I launch ivms-4200 on the laptop the software runs okay but constantly in the lower right corner of the laptop screen receiving a pop-up message as follows:
'Error code
OpenSDK[310002].
(AccessToken exception or
is expired. Log in to the Hik
Connect account again.)'
I opened my browser and opened up the hik-connect.com address and logged in, but I still receive the message.
Confused ???
↧
September 10, 2019, 4:46 am
Hi,
I'm thinking of going with these cameras and a Hikvision NVR for my first video surveillance. The specs look good with intrusion detection and line-crossing being supported, along with vari-focal optics.
However, what is not clear is the amount of lines that can be tracked with line-crossing. I noticed that some of the older cameras only support 1 line. Some of the high end ones explicitly mention 4 lines.
Can these cameras from the Easy IP 3.0 G1 platform support 4 lines for this...
Hikvision DS-2CD2645FWD-IZS smart events inquiry
↧
September 11, 2019, 12:41 am
Hi,
I'm trying to get ivms software to display on two screens but when i put auxiliary screen preview on, my live view works on one screen but when i want to view another live view on the other screen, it gives me an error "play window count is not enough for view".
Any ideas on what the problem can be?
↧
September 11, 2019, 5:18 am
Hi guys,
Im not sure if there has been much said about this, but is there a need to do updates in a certain sequence to bring the camera update? Or can I just pick the latest update and do that one?
I have four Cameras with firmware below:
Cam 1
DS-2CD2142FWD-I
V5.3.6 build 151105
Cam 2
DS-2CD2142FWD-I
V5.3.6 build 151105
Cam 3
DS-2CD2142FWD-I
V5.3.6 build 151105
Cam 4
DS-2CD2142FWD-I
V5.4.1 build 160525
Camera Firmware from...
Update Firmware - IP Camera - DS-2CD2142FWD-I
↧
↧
September 11, 2019, 6:31 am
I am using cctv cameras of hikvision 2ce1adot - irpf 4 numbers. These are of 2mp and 1080p configuration.
The dvr used is 7a04hqhi-k1. A cctv technician only installed it.
But when I check the record settings, the camera is shown as 720p25 and record mode maximum resolution is 720p and below only. I cant find full hd or 1080p mode in that.
What did i get wrong here? I checked the camera and dvr labels and all of them shows the correct model numbers. Please help. Its urgent.
↧
September 11, 2019, 6:58 am
Please am settingup the DS-2CD2041G1-IDW1 wireless camera it working on the LAN but cant view over the wireless network. please what am i not doing right. Thanks
↧
September 12, 2019, 12:01 am
Hi, when viewing my cameras on HikVision IP via the laptop I can operate the 'Recording' or 'Capture' feature and in the bottom right corner it tells me that it was successful and also displays where the file was saved to, but I can only view the Jpeg still images, the Mp4 files error when I try to view them.
The cameras are set-up in 1080p HD at H264+, I am using Windows 10. I am used to viewing Mp4 files as this is the same files as used with my GoPro video camera and it won't play the...
I cannot view my downloaded video
↧